Cyclone separators CYGG
We produce a series of cyclone separators, composed of 22 types of cyclones, which are graded according to the conventional dimensional lines of the pipeline. We cover the range from 500 m3 / h up to 30 000 m3 / h.
Use of cyclone separators
Cyclone separators have their application as dust separators placed in front of the final filter device. By their function, they ensure separation of the coarser fraction before entering the filtration device. Only a fine drift will then enters the filter. The use of a cyclone separator in combination with a filtration device brings higher operational reliability of the system, reducing the filter load and extending the service life of the filter medium. Cyclone separators can also be used separately without an end filter, mainly in wet sawdust and wood chip extraction applications. Here the cyclones achieve a high separation efficiency and it is not necessary to use the final stage of filtration.
Accessories for cyclone separator
• Cyclone separators from our production are already in the basic version equipped with an extension for the expansion vessel on the discharge throat of dust. The most common accessory is the use of a rotary feeder for the discharge of dust, which separates the working overpressure or vacuum inside the separator from the surrounding environment and at the same time ensures the removal of dust. The cyclone separator must be placed on the steel structure. The cyclone body can be thermally insulated in case of application in the hot flue gas
Demonstration of our equipment in practice
Welded pipelines for ventilation
We are G&G filtration
G&G is engaged in the development and production of industrial air extraction and filtration products. G&G was founded jointly by Ing. Radek Veselý and Ing. Miloš Gregor because of the sole goal of manufacturing filter technology for international markets.
filtration for the whole world