Engineering

Industrial central vacuum systems

Industrial central vacuum systems

We are engaged in studies and consulting focused on industrial cleaning technologies in various industrial plants such as (power plants, heating plants, waste incinerators, foundries, cement plants, etc.). We an also prepare studies of modernization of existing units.

Stationary industrial central vacuum cleaner

Stationary industrial central vacuum cleaner


The stationary suction device consisting of a central suction unit, a filter separator, a possible pre-separator without a filter and a distribution system with connection to a place that serves as a base for sucked material from a place where cleaning work can be performed and with the device.

The material is sucked from the individual connection points and received in the separator, from where it is discharged into the appropriate space or related technology.

Specifications

  • engine power 5 to 160kW
  • intake air volume up to 8000 m3 / h
  • obtained vacuum value up to 90%
    possible explosion protection according to ATEX
  • complete electronic control for automatic device control

Suction equipment and piping are always designed according to the requirements and wishes of the customer.

Mobile industrial vacuum cleaners

Mobile industrial vacuum cleaners


They are used for large-scale suction work outside production areas (eg troubleshooting and accidents, the suction of sludge sumps, extraction of settled flue gases in flues, etc.) or in plants where individual workplaces are very far apart and a central stationary cleaning system should here it was neither efficient nor economically advantageous. The most common industries are those where it is necessary to extract a large volume of bulk material, which must then often be transported over long distances. The need for regular cleaning and the reduction of secondary dust in large engineering plants and energy often leads to the installation of several separate central pipelines in several production facilities, which are terminated by a connection point for a mobile dedusting device (vacuum cleaner).

A mobile suction device is a suction device (suction unit and filter separator with collection space) located on the chassis of a truck, or on the chassis of a trailer or semi-trailer.

Mobile suction devices achieve an output of 220 kW, a vacuum of up to 950 mbar and extract up to 8,100 m3 of air per hour. To ensure sufficient efficiency and durability, the mobile suction device is of very robust construction, with minimal maintenance requirements, high-quality filtration (purity of the blown air is> 99.9%) and the possibility of extracting harmful and explosive specks of dust.

These devices can be equipped with explosion protection according to ATEX standards in the case of dust with a risk of explosion.

Suction equipment and piping are always designed according to the requirements and wishes of the customer.