G&G Jet BAG
G&G Jet BAG 36-10-20-RF
The G&G Jet BAG bag filter is designed for dust extraction without the risk of explosion. Depending on the type of dust extraction, the G&G Jet BAG 36-10-20-RF is available for a suction capacity of 15120 m3/h up 37800 m3/h. Variant filter for dust explosion, we offer according to specific demand.Choose a variant:
Request a quote
DescriptionBaghouse filter from the production of G&G Filtration is a dry, cloth-type dust filtration device with automatic regeneration of the filtering medium by compressed air. Regeneration of the filter medium is performed cyclically at set time intervals with the possibility of control according to the current pressure loss. The suction power is determined by the fan used according to the type of material and the required load on the filter surface. The fan is not part of the filter unit. Recommended loads on filtering medium for each type of dust are listed below. The filtration equipment is made in an outdoor version without the necessity of roofing. The filtration equipment achieves high filtration efficiency - 99%, so it is possible to return the filtered air mass back to the production hall area. The ratio of air return to the hall space and outdoor environment is determined by the technology designer according to the characteristics of the extracted material and the air conditions of the production object.
Use of baghouse filterThe filtering device is designed for dust separation from exhausted air mass. The filtration system is always composed of a specific filter unit and an associated exhaust fan. The combination of the filter unit and exhaust fans differs for different types of dust and according to the required filter surface. The load on the filter surface varies for the dust types due to: fraction size, density, area, tack, grease and other factors that we transfer to the common unit in industrial filtration, and this is the load on the filter surface. The purpose is to design a filter + fan combination for a specific type of dust extraction and process so that the filtering device achieves continuous extraction performance and filtered air purity over the declared lifetime of the filter medium - at least 20,000 operating hours. The incorrect ratio of the used filtering equipment to the fan results in unstable operating conditions with a characteristic rapid increase of the pressure loss of the filter medium and the degradation of the suction power. Available filter variants: With a discharge to a 55-litre bucket, to a 200-litre container, to the Big-Bag. All types of filters are made for non-explosive dust as well as ATEX.
Working conditionsThe filtration device is designed for filtration of air mass with temperature -30 ° C to + 80 ° C in the version without thermal insulation and up to 150 ° C in the version with thermal insulation. The filter is not designed for explosive dust (it can be extended with an option). The suction power is determined by the load factor of the filtering surface for the individual type of dust extracted. The following paragraph lists the most basic applications and the determination of the extraction performance of the G&G - JET BAG filter unit.
- order number JET BAG 36-10-20-RF
- filter area 252 m2
- air flow 15120 m3/h up 37800 m3/h
- type of filter media flat filter hose
- single element area 0,70 m2
- type of regeneration JET system
- compressed air consumption 36 Nm3 (6 bar)
- number of filter hoses 360 pcs.
- temperature resistance 150°C
- waste bin rotary feeder + big bag
- design for EX not for explosive dust
- inlet flange 3x 1000x270 (mm)
- output flange 3x 750x250 (mm)
- length - width - height 3308 / 3360 / 6863 (mm)
- filter weight 4175 kg